The problem
The property in Ashcroft had a single water meter feeding both the main house and the granny flat. The owner wanted the two dwellings billed separately so each paid for its own water.
The old shared line had no leaks or other faults. This was purely a job to divide the supply, not to fix a problem.
What we did
- Arranged approval for the new meter with Sydney Water, which came through in under a week
- Hand dug a trench about 12 m long and 300 mm deep through lawn and soil
- Laid a new 20 mm copper supply line for the second dwelling
- Installed the new meter beside the existing one
- Joined the new line to the old copper with press fittings and fitted isolation valves
- Cut and rerouted the old shared line so it now serves the main house only
We dug the trench by hand rather than using a machine. The water was off for under an hour. Backflow testing wasn't required on this job, so we fitted isolation valves only.
The result
The main house and the granny flat now each have their own meter, so water is billed fairly to each dwelling. The job took a full day. We backfilled the trench and left the lawn for the owner to re-lay.
Tip for homeowners
If you have a granny flat or a second dwelling on a shared meter, ask a plumber about separate metering. Sydney Water approval is needed first, so it's worth starting that early.







