Hydro jetting for drains that keep blocking
When a plunger or drain snake only gets the water moving for a few weeks, hydro jetting scours the whole pipe clean. High-pressure water cuts through tree roots, grease and silt that cause repeat blockages.
- Licensed, NSW 394718C
- Upfront pricing
- All of Sydney
When hydro jetting is the right tool
- A drain that blocks again every few weeks or months
- Tree roots in sewer or stormwater lines
- Grease build-up in kitchen drains
- Stormwater pits and lines full of silt and leaves
- Slow drains right through the house
How hydro jetting works
Find the access point
We locate the nearest inspection opening or clear-out on the line.
Jet the line
A hose with a special nozzle sends high-pressure water down the pipe, cutting roots and blasting build-up off the walls.
Flush it through
Everything is flushed down the line, leaving the pipe clean rather than just poked through.
Check on camera
Where needed, we put a camera down afterwards so you can see the pipe is clear and spot any cracks or damage.
Jetting or a drain snake?
A drain snake is quick and cheap for a simple blockage. Hydro jetting is better when the pipe itself is coated in grease or full of roots, because it cleans the whole pipe.
We use the right tool for the job and explain why, so you're not paying for jetting when a snake would do.
Questions people ask
Will hydro jetting damage my pipes?
In sound pipes, no. If the camera shows a pipe that's badly cracked or collapsed, we'll tell you before jetting it.
How long does it last?
Jetting clears roots and build-up, but roots can grow back through cracked joints over time. The camera footage helps you decide on a long-term fix.
Can you jet stormwater lines?
Yes. Stormwater pits and lines full of silt and leaves are a common jetting job, especially before storm season.