Gas hot water system replaced
Old unit removed and a new 135L gas hot water system installed, with a new tempering valve, pressure limiting valve, isolation valves and gas isolation valve.
Gas hot water work needs a licensed gasfitter as well as a plumber. We're both, so we handle the whole job: the water side, the gas connection and the testing.
We check the gas supply, ignition, thermostat, valves and water side to find what's actually wrong.
If a part will fix it properly, we'll repair it. If the unit is near the end of its life, we'll tell you straight and quote a replacement.
Every gas connection is tested for leaks before we leave, and the appliance is checked to make sure it's running safely.
We provide the compliance paperwork required for gas work in NSW.
Gas storage systems keep a tank of hot water ready. Continuous flow units heat water only when you turn a tap on, so they never run out and take up less space.
Which suits you depends on how many people are in the house, your gas supply and where the unit can go. We'll talk you through it.
Old unit removed and a new 135L gas hot water system installed, with a new tempering valve, pressure limiting valve, isolation valves and gas isolation valve.
Yes. Gas work must be done by a licensed gasfitter. Our NSW licence 394718C covers plumbing, drainage and gasfitting.
Usually. The error code points us to the fault, often ignition, gas supply or a sensor. Some units need a manufacturer part.
Turn the gas off at the meter if it's safe, don't use switches or flames nearby, open windows and call us straight away.